Lubricants for aluminium rolling industry | TotalEnergies Lubricants (2024)

Lubrilam S Series are non-staining aluminium cold rolling base oils. They have a narrow boiling range reducing both rolling oil consumption and residues on the sheets/foils. They also have a very low aromatic content ensuring low odor, good resistance to oxydation and a safe workshop environment.

Our products comply with the requirements of the food packaging industries: EU Regulation 1935/2004, FDA 21 CFR §178.3620 (b), Chinese standards GB 9685-2008).

View product

Lubrilam ADD are additive concentrates that optimize the frictional properties of the cold rolling oils such as Lubrilam S in order to achieve the desired surface finish.

They can be mixed to enable fine-tuning of rolling oils formulations.

Those additives participate in reducing scrap rate, extending rolling oil life, increasing production and improving surface quality of the rolled products.

Our products meets the requirements of FDA 21 CFR §178.3910 (a), Chinese standards GB 9685-2008.

View product

Azolla AL and Azolla ALS Series are recommended for the lubrication of hydraulic systems of aluminum rolling mills.

Their cross-contamination in the rolling oils will not cause staining during annealing. Azolla AL oils are formulated with non-staining base oils and high performance additives providing good oxidation stability and anti-wear properties.

The different viscosity grades make AzollaAL suitable for low and high pressure hydraulic systems.

Our products are registered NSF H1 hence conforming to FDA regulation 21 CFR 178.3570. Therefore, they can be used as hydraulic fluids in mills that produce foil for the food packaging industry. Azolla ALS oils are premium synthetic and very low gum-forming hydraulic fluids. They are specifically recommended when annealing temperature are low.

View product

Carter ALS oils are recommended for the lubrication of work rolls and/or back-up rolls bearings of aluminium mills.

In case of leakages into the rolling oil, they will not create brown stains during annealing.

These oils exhibit very good extreme pressure and anti-wear properties for an efficient protection of the bearings.

These oils can also be used in bath lubrication and oil-mist lubrication.

View product

Lubrilam Cleaner are air-wash scrubbing oils recommended for use in fumes recovery systems.

They possess high solvent recovery properties which enable to reduce VOC emissions and recover large amounts of rolling fluid.

These oils exhibit excellent resistance to oxidation. Therefore, they are able to resist to the severe constraints induced by the contact with the humid atmosphere and high temperatures.

View product